PPO(PPE)+PS Generic PPE+PS+Nylon - Mineral
0
- Properties:Fillermineral filler
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.20to1.25 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.80to1.1 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 4200to4790 MPa | |
| tensile strength | ISO 527-2 | 60.0to65.0 MPa | |
| Tensile strain | ISO 527-2 | 4.0to7.0 % | |
| Flexural modulus | ISO 178 | 4000to4440 MPa | |
| bending strength | ISO 178 | 105to110 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 3.5to4.0 kJ/m² | |
| Impact strength of cantilever beam gap | ISO 180 | 4.0to4.5 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 184to205 °C | |
| vicat | ISO 306 | 185to200 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 5.0E-5到6.0E-5 cm/cm/°C | |
| ISO 11359-2 | 6.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top