TPV 3139DN DSM HOLAND

Form：Granules | Grade：Injection grade

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	HB
elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	横向Flow:100%Strain	ISO 37	8.90	Mpa
	tensile strength	Flow:100%Strain	ASTMD412	13.3	Mpa
	tensile strength	tensile strength	横向Flow:100%Strain	ASTM D412	8.89	Mpa
Permanent compression deformation	125°C,70hr	ASTMD395	85	%
	Permanent compression deformation	70°C,22hr	ASTMD395	67	%
	Permanent compression deformation	Permanent compression deformation	23°C,22hr	ASTMD395	53	%
tear strength	--3，横向Flow	ISO 34-1	100	kN/m
tear strength	tear strength	-横向Flow	ASTM D624	102	kN/m
elongation	Flow:Break	ASTMD412	400	%
elongation	elongation	横向Flow:Break	ASTMD412	700	%
tensile strength	Flow:Break	ASTMD412	17.4	Mpa
tensile strength	tensile strength	横向Flow:Break	ASTMD412	18.5	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI Elec		UL 746	50.0	°C
RTI Imp		UL 746	50.0	°C
RTI		UL 746	50.0	°C
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD,5Sec,Injection	ASTMD2240	41
Shore hardness	Shore hardness	ShoreD,5Sec,挤塑	ASTMD2240	38
aging	Test Condition	Test Method	Test Result	Test Unit
Change rate of hardness (Shore) in the air	支撐D,135°C,1000hr	ASTMD573	0.0
Change rate of hardness (Shore) in the air	Change rate of hardness (Shore) in the air	支撐D,150°C,168hr	ASTMD573	1.0
Volume change	125°C,70hr,在IRM903油中	ASTMD471	55	%
Change rate of ultimate elongation in air	150°C,168hr，Across Flow	ISO 188	-11	%
	Change rate of ultimate elongation in air	135°C,1000hr，Across Flow	ISO 188	-10	%
		Change rate of ultimate elongation in air	150°C,168hr，Across Flow	ASTM D573	89	%
		Change rate of ultimate elongation in air	Change rate of ultimate elongation in air	135°C,1000hr，Across Flow	ASTM D573	90	%
Change rate of tensile strength in air	100%Strain150°C,168hr，Across Flow	ISO 188	11	%
	Change rate of tensile strength in air	100%Strain135°C,1000hr，Across Flow	ISO 188	9.0	%
		Change rate of tensile strength in air	100%Strain,150°C,168hr，Across Flow	ASTM D573	11	%
			Change rate of tensile strength in air	150°C,168hr，Across Flow	ASTMD573	-7.0	%
				Change rate of tensile strength in air	100%Strain,135°C,1000hr，Across Flow	ASTM D573	9.0	%
				Change rate of tensile strength in air	Change rate of tensile strength in air	135°C,1000hr，Across Flow	ASTMD573	-5.0	%
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ApparentShearViscosity-Capillary,@206/s	200°C	ASTM D3835	310	Pa·s
ApparentShearViscosity-Capillary,@206/s	ApparentShearViscosity-Capillary,@206/s	200°C	ISO 11443	310	Pa·s

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top