
ABS P2HE Ineos ABS
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Melt Volume Flow Rate (MVR) | 220℃,10kg | ISO 1133 | 7.00 | cm3/10min |
| density | ISO 1183 | 1040 | kg/m3 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Nominal fracture strain | ISO 527-1 | 0.00 | % | |
| Tensile strain | Yield | ISO 527-1 | 2.3 | % |
| Tensile stress | Yield | ISO 527-1 | 44.0 | MPa |
| Tensile modulus | ISO 527-1 | 2500 | MPa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.80MPa | ISO 75-1 | 96.0 | ℃ |
| 0.45MPa | ISO 75-1 | 100 | ℃ | |
| Linear coefficient of thermal expansion | ISO 11359-1 | 0.000090 | cm/cm℃ | |
| Vicat softening temperature | 50℃/h 50N | ISO 306 | 99.0 | ℃ |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | IEC 60243-1 | 34 | KV/mm | |
| Dielectric loss | 1000Hz | IEC 60250 | 0.0070 | |
| 100Hz | IEC 60250 | 0.0090 | ||
| Relative permittivity | 1000Hz | IEC 60250 | 2.90 | |
| 100Hz | IEC 60250 | 3.00 | ||
| Volume resistivity | IEC 60093 | 1E+13 | ohm.m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.