PPA

PPA AMODEL® AF-4133 WH SOLVAY USA

Properties:
Flame retardantHigh temperature resistanFiller: Glass fiber reinf33% filler by weight
Usages:
Automotive componentsElectronic and electrical componentsElectrical componentsElectrical/Electronic ApplicationsLaptop caseVehicle electronics
Compare View Prices

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	68 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	79 kJ/m²

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	3.2mm	UL 94	HB

mechanical properties	Test Condition	Test Method	Test Result
Bending strain		ISO 178	3.1 %
bending strength	23°C	ISO 178	295 Mpa
Bending modulus	23°C	ISO 178	10700 Mpa
Tensile strain	Break,23°C	ISO 527-2	2.5 %
tensile strength	Break,23°C	ISO 527-2	210 Mpa
Tensile modulus	23°C	ISO 527-2	12000 Mpa

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	TD：100to200°C	ASTME831	1.2E-04 cm/cm/°C
	Linear coefficient of thermal expansion	TD：0to100°C	ASTME831	7.6E-05 cm/cm/°C
		Linear coefficient of thermal expansion	MD：100to200°C	ASTME831	1.5E-05 cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：0to100°C	ASTME831	2E-05 cm/cm/°C
Melting temperature		ISO 11357-3	327 °C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	>300 °C
Glass transition temperature		DSC	95.0 °C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	24hr	ASTM D570	0.23 %
Shrinkage rate	TD	ASTM D955	0.80 %
Shrinkage rate	Shrinkage rate	MD	ASTM D955	0.40 %

Electrical performance	Test Condition	Test Method	Test Result
Dissipation factor	60Hz	ASTM D150	6E-03
Dielectric constant	1MHz	ASTM D150	3.75
Dielectric constant	Dielectric constant	60Hz	ASTM D150	4.10
Dielectric strength	3.20mm	ASTM D149	19 KV/mm
Volume resistivity		ASTM D257	5.6E+15 ohms·cm
High voltage arc tracing rate	HVTR	UL 746	mm/min
Compared to the anti leakage trace index	CTI	UL 746	PLC 0
Dissipation factor	1MHz	ASTM D150	0.015

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PPA AMODEL® AF-4133 WH SOLVAY USA

Technical Data Sheet

You May Like