Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTMD955 | 0.40到0.60 % |
| density | | ASTMD792 | 1.17 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 16 g/10min |
| melt mass-flow rate | | ASTMD1238 | 70 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 120 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 925 °C |
| Limiting Oxygen Index | | ASTMD2863 | 29 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 62.1 MPa |
| tensile strength | | ASTMD638 | 45.5 MPa |
| elongation | | ASTMD638 | 4.0 % |
| elongation | | ASTMD638 | 60 % |
| Flexural modulus | | ASTMD790 | 2830 MPa |
| bending strength | | ASTMD790 | 97.9 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 640 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | IEC60335-1 | 90.0 °C |
| | ASTMD648 | 95.0 °C |
| | ASTMD648 | 82.8 °C |
| vicat | | ASTMD15253 | 108 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare