
PA6 1013NB UBE JAPAN
69
Form:Granules | Grade:Injection grade
Properties:
transparentFast forming cycle
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | transparent | Fast forming cycle |
Certificates
No Data...
Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| characteristic | 阻燃性 | |||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Elongation at Break | ASTM D638/ISO 527 | 20 | % | |
| bending strength | ASTM D790/ISO 178 | 1150 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 29000 | kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 7 | % | |
| Elongation at Break | ASTM D638/ISO 527 | 780 | % | |
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 5.0 | kg·cm/cm(J/M)ft·lb/in | |
| ASTM D256/ISO 179 | 3.0 | kg·cm/cm(J/M)ft·lb/in | ||
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 8 | mm/mm.℃ | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | ASTM D570/ISO 62 | 10.7 | % | |
| density | ASTM D792/ISO 1183 | 1.14 | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257/IEC 60093 | 10 | Ω.cm | |
| Dielectric constant | ASTM D150/IEC 60250 | 3.8 | ||
| ASTM D150/IEC 60250 | 3.9 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.