PA6 Staramide PF00AE EUROSTAR FRANCE

Properties:

Filler glass fiber reinforced material 50% filler by weight

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Filler | glass fiber reinforced material | 50% | filler by weight

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	5mm/min，23°C	ISO 527-2	224	MPa
Elongation at Break	5mm/min，23°C	ISO 527-2	3.2	%
Tensile modulus	1mm/min，23°C	ISO 527-2	14000	MPa
bending strength	2mm/min，23°C	ISO 178	320	MPa
Bending modulus	2mm/min，23°C	ISO 178	13250	MPa
Impact strength of cantilever beam gap	23°C	ISO 180/1A	18.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C	ISO 180/1A	15.0	kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	90.0	kJ/m²
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.80MPaAnnealed	ISO 75-2/Af	212	°C
Hot deformation temperature	Hot deformation temperature	热球压力测试	IEC 60695-10-2	123-127	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C，Saturation	ISO 62	4.5	%
Water absorption rate	Water absorption rate	(23°C,50RH)	ISO 62	0.600	%
density		ISO 1183	1.55	g/cm³
Shrinkage rate	MD	ISO 294-4	0.10-0.20	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top