Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.19 g/cm³ |
| Shrinkage rate | | ASTM D955 | 0.30 % |
| Water absorption rate | | ASTM D570 | 0.15 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 107 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmissivity | | ASTM D1003 | 92.0 % |
| Haze ratio | | ASTM D1003 | <1.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 80 J/m |
| Impact strength of cantilever beam gap | | ASTM D4812 | NoBreak |
| Impact strength of cantilever beam gap | | ASTM D4812 | NoBreak |
| Dart impact | | ASTM D3763 | 38.0 J |
| Dart impact | | ASTM D3763 | 40.0 J |
| Impact strength of cantilever beam gap | | ASTM D256 | 44 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 50.0 MPa |
| tensile strength | | ASTM D638 | 43.0 MPa |
| elongation | | ASTM D638 | 5.0 % |
| elongation | | ASTM D638 | 270 % |
| Flexural modulus | | ASTM D790 | 1900 MPa |
| bending strength | | ASTM D790 | 68.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 66.0 °C |
| vicat | | ASTM D15252 | 86.0 °C |
| Heat distortion temperature | | ASTM D648 | 73.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare