Share
Add to compare

PBT PB70 GR15 MELOS GERMANY

9

Form:Granules | Grade:Flame retardant grade

Properties:
Low friction coefficientImpact resistanceThermal insulationAging resistanceHigh glossDimensional stabilityFiller: Glass fiber reinf15% filler by weight
Typical Applications:
Electronic fieldElectrical field
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Electronic field | Electrical field
Properties:Low friction coefficient | Impact resistance | Thermal insulation | Aging resistance | High gloss | Dimensional stability | Filler: Glass fiber reinf | 15% filler by weight

Certificates

No Data...

Technical Data Sheet

otherTest ConditionTest MethodTest ResultTest Unit
purpose电工电子器材
characteristic加纤20% 增强级
impact performanceTest ConditionTest MethodTest ResultTest Unit
Suspended wall beam without notch impact strength23°CISO 180/1U50kJ/m²
Suspended wall beam without notch impact strength-30°CISO 180/1U45kJ/m²
flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating1.6mmUL 94HB
UL flame retardant rating0.75mmUL 94HB
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Tensile strainBreak,23°CISO 527-23.0%
tensile strengthBreak,23°CISO 527-2105Mpa
Tensile modulus23°CISO 527-26000Mpa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Melting temperatureISO 11357-3225°C
Vicat softening temperatureISO 306/B205°C
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A195°C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B215°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Shrinkage rateTDInternal Method1.1%
water contentISO 15512<0.080%
Water absorption rateEquilibrium,23°C,50%RHISO 620.20%
Shrinkage rateMDInternal Method0.50%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Volume resistivityIEC 600931E+16ohms·cm
Surface resistivityIEC 600931E+14ohms
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.