HDPE Jam PE 524H1
0
- Usages:Blow molding applicationspiping systemsfilms
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD1505 | 0.952 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 0.15 g/10min |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTMD882 | 45.0 MPa | |
| Falling hammer impact | ASTMD1709A | 60 g | |
| Tear resistant ductility | ASTMD1004 | 200 g | |
| ASTMD1004 | 400 g | ||
| Film thickness - tested | 15 µm | ||
| Secant modulus | ASTMD882 | 900 MPa | |
| ASTMD882 | 800 MPa | ||
| tensile strength | ASTMD882 | 50.0 MPa | |
| ASTMD882 | 30.0 MPa | ||
| ASTMD882 | 52.0 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top