POM KEPITAL® FG2020 KEP KOREA
34
- Properties:Good wear resistancegoo
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.50 % | |
| Water absorption rate | ASTM D570 | 0.20 % | |
| density | ASTM D792 | 1.58 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 6.5 g/10 min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 120 MPa | |
| tensile elongation | ASTM D638 | 2.0 % | |
| Flexural modulus | ASTM D790 | 6680 MPa | |
| bending strength | ASTM D790 | 157 MPa | |
| IZOD notch impact strength | ASTM D256 | 57.0 J/m |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 HB |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1E+16 ohms | |
| Volume resistivity | ASTM D257 | 1E+14 ohm·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| heat distortion temperature | ASTM D648 | 164 °C | |
| melting temperature | ASTM D3418 | 165 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top