
PP KP03B FCFC TAIWAN
248
Form:Granules | Grade:Impact resistant grade
Properties:
High mobility
Typical Applications:
Automotive sectorchipcontainerPlastic boxThin walled products
Product Description
Certificates(9)
Datasheet
Product Description
| Typical Applications: | Automotive sector | chip | container | Plastic box | Thin walled products |
| Properties: | High mobility |
Certificates

TDS
Processing



SVHC
PSC

Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 78 | J/m |
| Bending modulus | 23°C | ASTM D790 | 1420 | Mpa |
| Elongation at Break | 23°C | ASTM D638 | 100 | % |
| tensile strength | 23°C | ASTM D638 | 25.5 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPaUnannealed | ASTM D648 | 115 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 230℃/2.16Kg | ASTM D1238 | 30 | g/10min |
| Shrinkage rate | MD2.0mm | ASTM D995 | 1.60 | % |
| density | ASTM D792 | 0.900 | g/cm³ | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | ASTM D785 | 95 | R | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL -94 | HB | 3.00mm | |
| UL -94 | HB | 1.50mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.