PBT/PC V3900WX-BK1066 SABIC INNOVATIVE SHANGHAI

Form：Granules | Grade：Flame retardant grade

Properties:

High impactLow warpageDimensional stabilityHigh toughnessWeather resistance

Typical Applications:

Automotive sectorCharging stationElectronic and electrical enclosureLighting applicationsCommunication equipmentWire and cable

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Charging station \| Electronic and electrical enclosure \| Lighting applications \| Communication equipment \| Wire and cable
Properties:	High impact \| Low warpage \| Dimensional stability \| High toughness \| Weather resistance

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃	ASTM D256	800	J/m
	Impact strength of cantilever beam gap	80104，30℃	ISO 180/1A	8	kJ/m²
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	30℃	ASTM D256	110	J/m
Charpy Notched Impact Strength	V-notch，23℃	ISO 179/1eA	52	kJ/m²
Impact strength of cantilever beam gap	80104，23℃	ISO 180/1A	45	kJ/m²
Instrumented dart impact energy -40 ℃ (-40 ℉) total energy		ASTM D3763	50	J
Instrumented dart impact energy 23 ℃ (73 ℉) total energy		ASTM D3763	50	J
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	1 mm/mi	ISO 527	2090	Mpa
Tensile modulus	Tensile modulus	5 mm/mi	ASTM D638	2200	Mpa
Bending modulus	2 mm/m	ISO 178	2130	Mpa
Bending modulus	Bending modulus	1.3 mm/m	ASTM D790	2200	Mpa
bending strength	2 mm/m，Yield	ISO 178	73	Mpa
bending strength	bending strength	1.3 mm，Yield	ASTM D790	80	Mpa
Elongation at Break	50 mm/m	ISO 527	42
	Elongation at Break	Type I, 50	ASTM D638	50
	Elongation at Break	Elongation at Break		ASTM D638	250
elongation	50 mm/m，Yield	ISO 527	4
elongation	elongation	Type I, 50，Yield	ASTM D638	5
tensile strength	Type I, 50，Break	ASTM D638	43	Mpa
	tensile strength	50 mm/m，Break	ISO 527	40	Mpa
		tensile strength	Yield	Internal	48	Mpa
			tensile strength	50 mm/m，Yield	ISO 527	51	Mpa
			tensile strength	tensile strength	Type I, 50，Yield	ASTM D638	53	Mpa
thermal properties	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature	Rate B/50	ASTM D1525	105	°C
	Vicat softening temperature	Rate B/5	ISO 306	123	°C
	Vicat softening temperature	Vicat softening temperature	Rate B/5	ISO 306	121	°C
RTI Imp		UL 746B	120	°C
Linear coefficient of thermal expansion	-40°C to 4，Flow	ISO 11359-2	88.4 E-6	°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	-40°C to 4，Across Flow	ASTM E831	89.7 E-6	°C
RTI Elec		UL 746B	120	°C
RTI Imp		UL 746B	120	°C
Linear coefficient of thermal expansion	-40°C to 4，Flow	ASTM E831	88.4 E-6	°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	-40°C to 4，Across Flow	ISO 11359-2	89.7 E-6	°C
Ball indentation temperature	Pass	IEC 60695-10-2	75	°C
Ball indentation temperature	Ball indentation temperature	Pass	IEC 60695-10-2	125	°C
combustion performance	Test Condition	Test Method	Test Result	Test Unit
UL fire rating V		UL 94	1.5	mm
UL flame retardant rating	5VA	UL 94	3	mm
Glow wire combustion index (GWFI)	1mm	IEC 60695-2-12	960	passes at
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C / 50	ISO 62	0.03
Water absorption rate	Water absorption rate	23°C/sat	ISO 62	0.1
Shrinkage rate	flow, 3.2	Internal	0.7-1
Melt Volume Flow Rate (MVR)		ISO 1133	11	cm³/10 min
melt mass-flow rate		ASTM D1238	35	g/10min
Electrical Property	Test Condition	Test Method	Test Result	Test Unit
Glow wire combustion index (GWFI)	3mm	IEC 60695-2-12	960	passes
Glow wire ignition temperature (GWIT)	1.0mm	IEC 60695-2-13	825
Glow wire ignition temperature (GWIT)	Glow wire ignition temperature (GWIT)	3.0mm	IEC 60695-2-13	725	by VDE
UV exposure, water exposure test, and immersion		UL 746C	F1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top