Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D4894 | 2.17 g/cm³ |
| Apparent density | | ASTM D4894 | 0.36 g/cm³ |
| Shrinkage rate | | 内部方法 | 4.4 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| MITFlexuralLife | | ASTM D2178 | 3E+06 |
| StretchingVoidIndex | | ASTM D4895 | 62.0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| compressive strength | | ASTM D695 | 8.70 MPa |
| compressive strength | | ASTM D695 | 5.90 MPa |
| compressive strength | | ASTM D695 | 28.6 MPa |
| Heat distortion temperature | | ASTM D621 | 10.6 % |
| Heat distortion temperature | | ASTM D621 | 21.7 % |
| tensile strength | | ASTM D4894 | 40.0 MPa |
| elongation | | ASTM D4894 | 500 % |
| Heat distortion temperature | | ASTM D621 | 14.9 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| compression set | | ASTM D621 | 3.0 % |
| compression set | | ASTM D621 | 7.4 % |
| compression set | | ASTM D621 | 4.1 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | ASTM D150 | <1.0E-4 |
| Surface Resistivity | | ASTM D257 | >1.0E+15 ohms |
| Volume resistivity | | ASTM D257 | >1.0E+18 ohms·cm |
| dielectric strength | | | 140 kV/mm |
| dielectric constant | | ASTM D150 | <2.10 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Continuous use temperature | | | 260 °C |
| melting temperature | | DSC | 324 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare