Share
Add to compare

PA66 MN201-G0ST North Chemical Institute

Properties:
This product has excellent low-temperature impact toughness and can maintain excellent impact strength at -40 ℃. It is easy to form and has good compatibility with metal inserts
Typical Applications:
Used for low-temperature resistant products such as automotive interior parts sports protective gear geological exploration equipment etc
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Used for low-temperature resistant products such as automotive interior parts | sports protective gear | geological exploration equipment | etc
Properties:This product has excellent low-temperature impact toughness and can maintain excellent impact strength at -40 ℃. It is easy to form and has good compatibility with metal inserts

Certificates

No Data...

Technical Data Sheet

processabilityTest ConditionTest MethodTest ResultTest Unit
Spiral flow length21cm
Shrinkage rateISO 294-41.5-2.0%
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Charpy Notched Impact StrengthNotchedISO 179(leA)≥80KJ/m2
Bending modulusISO 1781.0*103MPa
bending strengthISO 17873MPa
elongationBreakISO 527140%
tensile strengthISO 52755MPa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature1.82MPaISO 75f58
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
densityISO 11831.09g/cm3
Water absorption rate23℃,24hrISO 621.28%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
ash content0%
Arc resistanceIEC 61621--Sec
Dielectric strengthIEC 6024330KV/m
Volume resistivityIEC 600931*1014Ω。m
Dielectric loss106HZ,TangentIEC 602503.0*10-2
Dielectric constant106HZIEC 602503.4
flame retardant performanceTest ConditionTest MethodTest ResultTest Unit
UL flame retardant ratingUL 94HB
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.