
ABS 750 KUMHO KOREA
117
Form:Granules | Grade:Flame retardant grade
Properties:
High mobility Medium impact excellent
Typical Applications:
Home appliance componentsElectronic fieldElectrical fieldAutomotive sectorhome electrical appliancesAutomotive Parts Office MachinesGrocery etc
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Home appliance components | Electronic field | Electrical field | Automotive sector | home electrical appliances | Automotive Parts Office Machines | Grocery | etc |
| Properties: | High mobility | Medium impact | excellent |
Certificates

Technical Data Sheet
| machinability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.4-0.7 | % | |
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 200℃×5kg | ASTM D-1238 | 4.2 | g/10min |
| 200℃×21.6kg | ASTM D-1238 | 46 | g/10min | |
| 220℃×10kg | ASTM D-1238 | 35 | g/10min | |
| density | 23℃ | ASTM D-792 | 1.04 | 23℃ |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 23℃ | ASTM D-790 | 24000 | kg/cm |
| tensile strength | 23℃ | ASTM D-638 | 480 | kg/cm |
| Impact strength of cantilever beam gap | 1/8in(3.2mm).23℃ | ASTM D-256 | 26 | kg.cm/cm |
| Elongation at Break | 23℃ | ASTM D-638 | 30 | % |
| bending strength | 23℃ | ASTM D-790 | 650 | kg/cm |
| Impact strength of cantilever beam gap | 1/4in(6.4mm).23℃ | ASTM D-256 | 23 | kg.cm/cm |
| Rockwell hardness | R SCALE | ASTM D-785 | 108 | R |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 6.4mm18.6kg/cm | ASTM D-648 | 85(185)[95(203)] | ℃(℉) |
| Combustibility | UL 94 | HB | CLASS | |
| Vicat softening temperature | ASTM D-1525 | 95(203) | ℃(℉) |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.