PC NOVAREX® 7020R

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Melt volume flow rate		ISO 1133	18.0 cm³/10min
Shrinkage rate		ISO 294-4	0.60 %
Shrinkage rate	Shrinkage rate		ISO 294-4	0.60 %
density		ISO 1183	1.20 g/cm³

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2	2400 MPa
tensile strength	Yield	ISO 527-2	62.0 MPa
Tensile strain	Yield	ISO 527-2	6.6 %
Nominal tensile fracture strain		ISO 527-2	>50 %
Flexural modulus		ISO 178	2300 MPa
bending strength		ISO 178	93.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	9.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	NoBreak

Electrical performance	Test Condition	Test Method	Test Result
dielectric strength		IEC 60243-1	17 kV/mm
relative permittivity		IEC 60250	3.10
relative permittivity	relative permittivity		IEC 60250	3.10
Dissipation Factor		IEC 60250	6E-04
Dissipation Factor	Dissipation Factor		IEC 60250	9E-03
Compared to the Leakage Tracking Index (CTI)		UL 746	PLC 2
Surface Resistivity		IEC 60093	>1.0E+15 ohms
Volume resistivity		IEC 60093	>1.0E+15 ohms·cm

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/A	123 °C
Linear coefficient of thermal expansion		ISO 11359-2	6.5E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ISO 11359-2	6.6E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top