PEI 1000R GN8E009 SABIC INNOVATIVE US

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedFlame retardantenhance

Typical Applications:

Automotive sectorElectrical fieldElectronic field

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Electrical field \| Electronic field
Properties:	Glass fiber reinforced \| Flame retardant \| enhance

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24hr，73℉	ASTM D-570	0.250	%
melt mass-flow rate		ASTM D-1238	17.8	g/10min
Water absorption rate	Equilibrium,73℉	ASTM D-570	1.25	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break		ASTM D-638	60.0	%
Suspended wall beam without notch impact strength		ASTM D-4812	25.0	ft-lb/in
tensile strength	Yield	ASTM D-638	15200	psi
Bending modulus		ASTM D-790	480000	psi
Rockwell hardness		ASTM D-785	109	psi
bending strength	Yield	ASTM D-790	22000	psi
Impact strength of cantilever beam gap		ASTM D-256	0.6	ft-lb/in
Yield tensile elongation		ASTM D-638	7.0	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Heat index	电性能	UL 746B	170	°C
	Heat index	机械冲击性能	UL 746B	170	°C
	Heat index	Heat index	非机械性能	UL 746B	170	°C
Combustibility		UL 94	V-0	CLASS
Vicat softening temperature		ASTM D-1525	426	℉
Hot deformation temperature	264Psi	ASTM D-648	387	℉
Hot deformation temperature	Hot deformation temperature	66Psi	ASTM D-648	405	℉
Linear coefficient of thermal expansion	flow	ASTM E-831	3	E-5/in/in℉
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	xflow	ASTM E-831	-	E-5/in/in℉
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser		ASTM D-1044	10	mg/1000次
density		ASTM D-792	1.27
Shrinkage rate		ASTM D-955	5-7	in/inE-3
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1KHz	ASTM D-150	0.0013
Dielectric constant	1KHz	ASTM D-150	3.15
Dielectric strength	62mils	ASTM D-149	830	v/mil
Volume resistivity		ASTM D-257	1×10	Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top