TSC 3M
0
- Properties:Before injecting highly transparent TSC-M materialsthoroughly clean the machine with GPPS (especially if the machine has produced transparent ABStransparent HIPSacrylicSAN materialsetc.) to ensure that there are no residual materials in the barrel that affect the highest transparency of TSC-M
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.05 | |
| hardness | 77 Shore D |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmittance | ASTM D-1003 | 92% 1/8" | |
| Haze ratio | ASTM D-1003 | 1 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength | ASTM D-638 | 45 MPa | |
| IZOD impact strength | ASTM D-256 | 5 Kg.cm/cm | |
| Flexural modulus | ASTM D-790 | 2250 MPa | |
| bending strength | ASTM D-790 | 68 MPa | |
| ASTM D-638 | 35 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| softening point | ASTM D-1525 | 95 ℃ | |
| ASTM D-648 | 80 ℃ | ||
| melt mass-flow rate | ASTM D-1238 | 4.5 g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top