HDPE LH614
0
- Usages:Used for injection moldingcasting film extrusion
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 12 g/10min | |
| density | ASTM D-1505 | 0.962 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 150 kg/cm | |
| Torsional stiffness | ASTM D-1043 | 12100 kg/cm | |
| elongation | ASTM D-638 | 170 ％ | |
| ASTM D-747 | 9800 kg/cm | ||
| Shore hardness | ASTM D-2240 | 69 | |
| Flexural modulus | ASTM D-638 | 10000 kg/cm | |
| tensile strength | ASTM D-638 | 310 kg/cm | |
| Impact strength of cantilever beam gap | ASTM D-256 | 3.5 kg-cm/cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Low temperature brittleness temperature | ASTM D-746 | ＜-76 ℃ | |
| vicat | ASTM D-1525 | 126 ℃ | |
| melting temperature | ASTM D-2117 | 131 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top