TPU IROGRAN® A92K4107
52
- Properties:Low compression deformatiHigh elasticityHydrolysis resistanceOil resistantwear resistant
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | 6.00 cm3/10min | ||
| Shrinkage rate | ASTM D972 | 0.74 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 90 | |
| DIN 53505 | 90 | ||
| DIN 53505 | 41 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| wear resistance | ASTM D395 | 31 mm³ | |
| DIN 53516 | 25 mm³ |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | DIN 53504 | 55.0 Mpa | |
| elongation | DIN 53504 | 570 % | |
| tear strength | ASTM D624 | 107 kN/m | |
| DIN 53515 | 75 kN/m | ||
| compression set | ASTM D395 | 13 % | |
| ASTM D395 | 25 % | ||
| ASTM D395 | 30 % | ||
| ASTM D395 | 34 % | ||
| DIN 53517 | 13 % | ||
| DIN 53517 | 25 % | ||
| DIN 53517 | 30 % | ||
| DIN 53517 | 34 % | ||
| tensile strength | DIN 53504 | 8.10 Mpa | |
| DIN 53504 | 16.9 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | DIN 53372 | 164 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top