
ABS 920 555 IS002 TORAY MALAYSIA
116
Form:Granules | Grade:Transparent level
Properties:
High rigiditytransparent
Typical Applications:
small home appliancesElectronic field
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | small home appliances | Electronic field |
| Properties: | High rigidity | transparent |
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| transmissivity | Total,3000μm | ISO 13468 | 88.0 | % |
| turbidity | 3000μm | ISO 14782 | 2.0 | % |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Break | ASTM D638 | 20 | % |
| Tensile strain | Break,23°C | ISO 527-2 | 17 | % |
| Bending modulus | ASTM D790 | 2160 | Mpa | |
| 23°C | ISO 178 | 2260 | Mpa | |
| bending strength | ASTM D790 | 74.0 | Mpa | |
| 23°C | ISO 178 | 77.0 | Mpa | |
| tensile strength | ASTM D638 | 48.0 | Mpa | |
| Yield,23°C | ISO 527-2 | 54.0 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 83.0 | °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 77.0 | °C | |
| Vicat softening temperature | 90.0 | °C | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 220°C/10.0kg | ISO 1133 | 25 | g/10min |
| Shrinkage rate | Internal Method | 0.40-0.60 | % | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Sale,23°C | ASTM D785 | 115 | |
| R-Sale,23°C | ISO 2039-2 | 115 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.