Technical Data Sheet
| 物理性能 | Test Condition | Test Method | Test Result |
|---|
| 密度 | | ISO1183 | 1.42 g/cm³ |
| 熔体质量流动速率 | | ISO1133 | 2.6 g/10min |
| 熔体体积流动速率 | 190°C/2.16kg | ISO1133 | 2.20 cm3/10min |
| 收缩率 | TD | ISO294-4 | 1.9 % |
| 收缩率 | MD | ISO294-4 | 2.2 % |
| 吸水率 | 饱和,23°C,2.00mm | ISO62 | 1.4 % |
| 吸水率 | 平衡,23°C,2.00mm,50%RH | ISO62 | 0.30 % |
| MeltDensity | | | 1.19 g/cm³ |
| SpecificHeatCapacityofMelt | | | 3000 J/kg/°C |
| ThermalConductivityofMelt | | | 0.22 W/m/K |
| 热性能 | Test Condition | Test Method | Test Result |
|---|
| 熔融温度 | | ISO11357-3 | 178 °C |
| 线性热膨胀系数 | MD：-- | ISO11359-2 | 1.1E-04 cm/cm/°C |
| 线性热膨胀系数 | MD：-40to23°C | ISO11359-2 | 1E-04 cm/cm/°C |
| 线性热膨胀系数 | TD：-- | ISO11359-2 | 1.1E-04 cm/cm/°C |
| 线性热膨胀系数 | TD：-40to23°C | ISO11359-2 | 1E-04 cm/cm/°C |
| 线形热膨胀系数 | TD：AnnealingTemperature | ISO11359-2 | 160 °C |
| 线形热膨胀系数 | TD：AnnealingTime-Optional | ISO11359-2 | 30.0 min/mm |
| 热变形温度 | 0.45MPa,未退火 | ISO75-2/B | 155 °C |
| 热变形温度 | 1.8MPa,未退火 | ISO75-2/A | 95.0 °C |
| 维卡软化温度 | -- | ISO306/A50 | 175 °C |
| 维卡软化温度 | -- | ISO306/B50 | 160 °C |
| 补充信息 | Test Condition | Test Method | Test Result |
|---|
| Emission | | VDA275 | <8.00 mg/kg |
| EmissionofOrganicCompounds | | VDA277 | 4.70 µgC/g |
| 可燃性 | Test Condition | Test Method | Test Result |
|---|
| 燃烧速率3 | 1.00mm | ISO3795 | 50 mm/min |
| UL阻燃等级 | 0.8mm | UL94 | HB |
| UL阻燃等级 | 1.5mm | UL94 | HB |
| UL阻燃等级 | 0.8mm | IEC60695-11-10,-20 | HB |
| UL阻燃等级 | 1.5mm | IEC60695-11-10,-20 | HB |
| FMVSS可燃性 | | FMVSS302 | B |
| Fogging-F-value | refraction | ISO6452 | 91 % |
| 电气性能 | Test Condition | Test Method | Test Result |
|---|
| 表面电阻率 | | IEC60093 | 2E+13 ohms |
| 体积电阻率 | | IEC60093 | 1E+14 ohms·cm |
| 介电强度 | | IEC60243-1 | 41 KV/mm |
| 相对电容率 | 100Hz | IEC60250 | 3.90 |
| 相对电容率 | 1MHz | IEC60250 | 3.90 |
| 耗散因数 | 100Hz | IEC60250 | 3.5E-03 |
| 耗散因数 | 1MHz | IEC60250 | 5.5E-03 |
| 漏电起痕指数 | | IEC60112 | 600 V |
| 机械性能 | Test Condition | Test Method | Test Result |
|---|
| 拉伸模量 | | ISO527-2 | 2950 Mpa |
| 拉伸应力 | 屈服 | ISO527-2 | 71.0 Mpa |
| 拉伸应变 | 屈服 | ISO527-2 | 25 % |
| 标称拉伸断裂应变 | | ISO527-2 | 45 % |
| TensileCreepModulus | 1hr | ISO899-1 | 2700 Mpa |
| 拉伸蠕变模量 | 1000hr | ISO899-1 | 1500 Mpa |
| 弯曲模量 | | ISO178 | 2850 Mpa |
| 弯曲应力 | 3.5%应变 | ISO178 | 77.0 Mpa |
| 泊松比 | | ISO527 | 0.35 |
| 硬度 | Test Condition | Test Method | Test Result |
|---|
| 洛氏硬度 | M计秤 | ISO2039-2 | 88 |
| 洛氏硬度 | R计秤 | ISO2039-2 | 119 |
| 冲击性能 | Test Condition | Test Method | Test Result |
|---|
| 简支梁无缺口冲击强度 | -30°C | ISO179/1eU | 400 kJ/m² |
| 简支梁无缺口冲击强度 | 23°C | ISO179/1eU | NoBreak |
| 悬壁梁缺口冲击强度 | -40°C | ISO180/1A | 12 kJ/m² |
| 悬壁梁缺口冲击强度 | 23°C | ISO180/1A | 14 kJ/m² |
| 简支梁缺口冲击强度 | -30°C | ISO179/1eA | 14 kJ/m² |
| 简支梁缺口冲击强度 | 23°C | ISO179/1eA | 15 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices