ABS 532 INEOS STYRO THAILAND

Form：Granules | Grade：Injection grade

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
gloss	60℃		90
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	220℃,10kg	ISO 1133	2.5	g/10min
density		ISO 1183	1.04
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	50mm/min	ISO 527	31	Mpa
Elongation at Break	50mm/min	ISO 527	>25	%
Tensile modulus	1mm/min	ISO 527	1900	Mpa
bending strength	2mm/min,80×10×4	ISO 178	61	Mpa
Bending modulus	2mm/min,80×10×4	ISO 178	1900	Mpa
Impact strength of cantilever beam gap	23℃	ISO 180/1A	35	KJ/m
	Impact strength of cantilever beam gap	-20℃	ISO 180/1A	22	KJ/m
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30℃	ISO 180/1A	15	KJ/m
Rockwell hardness	t＝6.4mm	ISO 2039-2	95	R scale
Tensile stress	50mm/min，Yield	ISO 527	38	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa	ISO 75	93	°C
Vicat softening temperature	50N;120℃/h	ISO 306	95	°C
UL flame retardant rating	1.6mm	UL 94	HB
Hot deformation temperature	1.80MPa	ISO 75	90	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top