Polyester Alloy RTP 4799 X 121826 C RTP US
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.27 g/cm³ | |
| Shrinkage rate | ASTM D955 | 2.0 % | |
| water content | 0.030 % | ||
| Biobased content | 29 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 41.4 MPa | |
| elongation | Yield | ASTM D638 | >10 % |
| Flexural modulus | ASTM D790 | 2070 MPa | |
| bending strength | ASTM D790 | 68.9 MPa | |
| Tensile modulus | ASTM D638 | 2070 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 64 J/m | |
| Suspended wall beam without notch impact strength | ASTM D4812 | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1.0E+10到1.0E+11 ohms | |
| Volume resistivity | ASTM D257 | 1.0E+9到1.0E+10 ohms·cm | |
| StaticDecay | FTMS101C4046.1 | <2.0 sec |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top