PP+EPDM POLYelast TPE EC88R POLYKEMI SWEDEN
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 0.900 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 3.0 g/10min | |
| Shrinkage rate | ISO 294-4 | 0.90to1.1 % | |
| ISO 294-4 | 0.90to1.1 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 88 | |
| ASTM D2240 | 30 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 无断裂 | |
| ISO 179 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 527-2 | 15.0 MPa | |
| Tensile strain | Break | ISO 527-2 | >55 % |
| Flexural modulus | ISO 178 | 450 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 56.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top