PA66 22HSP ASCEND USA

Form：Granules | Grade：Injection grade

Properties:

Chemical resistanceHigh rigiditywear resistantOil resistanthigh strengthThermal stabilityHigh toughnessHigh liquiditytoughnessChemical resistance

Typical Applications:

Industrial applicationsElectrical applicationsAutomotive ApplicationsIndustrial machineryFitness equipmentInjection molding applications with basic engineer

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Industrial applications \| Electrical applications \| Automotive Applications \| Industrial machinery \| Fitness equipment \| Injection molding applications with basic engineer
Properties:	Chemical resistance \| High rigidity \| wear resistant \| Oil resistant \| high strength \| Thermal stability \| High toughness \| High liquidity \| toughness \| Chemical resistance

Certificates

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30℃	ISO 179	5.3	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23℃	ISO 179	6.6	kJ/m²
bending strength		ISO 178	35	Mpa
Bending modulus		ISO 178	2900	Mpa
Tensile modulus		ISO 527	3000	Mpa
elongation	Break	ISO 527	40	%
tensile strength	Yield	ISO 527	83	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-2
Hot deformation temperature	0.45MPa	ISO 75	200	°C
Hot deformation temperature	Hot deformation temperature	1.82MPa	ISO 75	70	°C
Melting temperature		ISO 3146	260	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.14	g/cm³
Water absorption rate	23℃,50%湿度	ISO 62	2.4	%
Water absorption rate	Water absorption rate	23℃,24hrs	ISO 62	1.1	%
Shrinkage rate	2mm,垂直	ISO 294-4	1.6	%
Shrinkage rate	Shrinkage rate	2mm,平行	ISO 294-4	1.4	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	4	ohm-cm×1015
Dielectric strength		IEC 60243	20	KV/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top