Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ISO294-4 | 0.90 % |
| Shrinkage rate | | ISO294-4 | 0.40 % |
| Water absorption rate | | ISO62 | 0.90 % |
| Water absorption rate | | ISO62 | 1.9 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| Burning wire flammability index | | IEC60695-2-12 | 675 °C |
| Burning wire flammability index | | IEC60695-2-12 | 675 °C |
| Burning wire flammability index | | IEC60695-2-12 | 675 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 700 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 700 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 700 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179 | 65 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179 | 75 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 10000 Mpa |
| Tensile stress | | ISO527-2 | 195 Mpa |
| Tensile strain | | ISO527-2 | 3.0 % |
| Flexural modulus | | ISO178 | 9600 Mpa |
| Bending stress | | ISO178 | 270 Mpa |
| Poisson's Ratio | | ISO527 | 0.40 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Hot wire ignition (HWI) | | UL746 | PLC 4 |
| VolumeResistivity | | IEC60093 | 1E+13 ohms·cm |
| dielectric strength | | IEC60243 | 20 KV/mm |
| arc resistance | | ASTMD495 | PLC6 |
| CTI | | IEC60112 | 250to399 V |
| High arc combustion index (HAI) | | UL746 | PLC 0 |
| High arc combustion index (HAI) | | UL746 | PLC 0 |
| High arc combustion index (HAI) | | UL746 | PLC 0 |
| High Voltage Arc Traceability Rate (HVTR) | | UL746 | PLC 1 |
| Hot wire ignition (HWI) | | UL746 | PLC 4 |
| Hot wire ignition (HWI) | | UL746 | PLC 3 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO11359-2 | 1.1E-04 cm/cm/°C |
| RTI Elec | | UL746 | 140 °C |
| RTI Elec | | UL746 | 140 °C |
| RTI Elec | | UL746 | 140 °C |
| RTI Imp | | UL746 | 120 °C |
| RTI Imp | | UL746 | 120 °C |
| RTI Imp | | UL746 | 120 °C |
| RTI Str | | UL746 | 125 °C |
| RTI Str | | UL746 | 140 °C |
| RTI Str | | UL746 | 140 °C |
| Heat distortion temperature | | ISO75-2/B | 260 °C |
| Heat distortion temperature | | ISO75-2/A | 250 °C |
| melting temperature | | ISO11357-3 | 260 °C |
| | ISO11359-2 | 2.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices