PEK G-PAEK™ 1230FC

0

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
density1.45 g/cm³
Shrinkage rate0.11 %
Shrinkage rate0.50 %
Water absorption rateEquilibriumASTM D5700.050 %
hardnessTest ConditionTest MethodTest Result
Rockwell hardnessASTM D785106
Shore hardnessASTM D224091
flammabilityTest ConditionTest MethodTest Result
UL flame retardant ratingUL 94V-0
Mechanical propertiesTest ConditionTest MethodTest Result
Flexural modulusASTM D79010500 MPa
bending strengthASTM D790210 MPa
coefficient of friction0.17
Tensile modulusASTM D63811500 MPa
tensile strength ASTM D638140 MPa
elongationASTM D6381.5to2.0 %
Impact resistanceTest ConditionTest MethodTest Result
Impact strength of cantilever beam gapASTM D25645 J/m
Suspended wall beam without notch impact strengthASTM D256610 J/m
Electrical performanceTest ConditionTest MethodTest Result
Surface ResistivityASTM D2571E+09 ohms
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureASTM D648349 °C
Continuous use temperatureUL 746B280 °C
Glass Transition TemperatureASTM D3418152 °C
melting temperatureASTM D3418372 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top