PC Nirion 1520/M

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.20 g/cm³
melt mass-flow rate		ASTM D1238	18 g/10min
Shrinkage rate		ASTM D955	0.50to0.80 %
Water absorption rate		ISO 62	0.30 %
Water absorption rate	Water absorption rate		ISO 62	0.12 %

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R-Scale	ASTM D785	60

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	HB
UL flame retardant rating	UL flame retardant rating		UL 94	V-2
Hot filament ignition temperature		IEC 60695-2-13	850 °C

Mechanical properties	Test Condition	Test Method	Test Result
bending strength	Break	ASTM D790	90.0 MPa
tensile strength	Yield	ASTM D638	60.0 MPa
tensile strength	tensile strength	Break	ASTM D638	70.0 MPa
elongation	Break	ASTM D638	100 %
Flexural modulus		ASTM D790	2200 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	150 J/m
	Impact strength of cantilever beam gap		ASTM D256	400 J/m
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256	600 J/m

Electrical performance	Test Method	Test Result
Surface Resistivity	IEC 60093	1E+15 ohms
Volume resistivity	IEC 60093	1E+14 ohms·cm
dielectric strength	IEC 60243-1	25 kV/mm
relative permittivity	IEC 60250	3.00
Dissipation Factor	IEC 60250	9E-03

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D648	125 °C
vicat	ASTM D15254	145 °C
Linear coefficient of thermal expansion	ISO 11359-2	7E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top