PP EC-HI
0
- Properties:High conductivity and impact resistance
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO 62 | 0.010 % | |
| density | ISO 1183 | 1.01 g/cm³ | |
| Shrinkage rate | ISO 294-4 | 1.3 到 1.8 % | |
| Water absorption rate | ISO 62 | 0.040 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | Break | ISO 527-2 | 25.0 MPa |
| Tensile strain | Break | ISO 527-2 | > 25 % |
| Flexural modulus | ISO 178 | 1600 MPa | |
| bending strength | ISO 178 | 35.0 MPa | |
| Impact strength of cantilever beam gap | ISO 180/1A | 50 kJ/m² | |
| ISO 180/1U | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | < 1.0E+3 ohm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| ISO 75-2/A | 60.0 ℃ | ||
| Linear expansion coefficient | ISO 11359-2 | 0.00012 cm/cm/℃ | |
| RTI Imp | UL 746 | 70.0 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top