PA66 105F BK010 DUPONT THAILAND

Form：Granules | Grade：Injection grade

Properties:

PhotostabilityShort molding cycleGood weather resistanceprocessabilityFlame retardancy (V-0)one32")High impact

Typical Applications:

Electronic and electrical accessoriesAutomotive componentsTV

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electronic and electrical accessories \| Automotive components \| TV
Properties:	Photostability \| Short molding cycle \| Good weather resistance \| processability \| Flame retardancy (V-0) \| one \| 32") \| High impact

Certificates

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638	83	Mpa
Bending modulus		ASTM D790	2830	Mpa
Elongation at Break		ASTM D638	25	%
Impact strength of cantilever beam gap		ASTM D256	59	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256	48	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	66 psi， Unannealed	ASTM D648	210	°C
Linear coefficient of thermal expansion	平行Flow	ASTM E831	0.00010	cm/cm/ ℃
UL flame retardant rating		UL 94	V-2
Melting temperature		DSC	263	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24hr	ASTM D570	0.95	%
Water absorption rate	Water absorption rate	Saturation	ASTM D570	8.59.0	%
Shrinkage rate	MD	ASTM D955	0.012	cm/cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top