PA46 Stanyl®  TW441

149
  • Properties:
    high viscosity
    Thermal stability
    Flame retardant
  • Usages:
    Home appliance components
    Electronic and electrical components

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityISO 11831.18 g/cm³
Shrinkage rateISO 294-42.0 %
Shrinkage rateISO 294-42.0 %
Water absorption rateISO 623.7 %
Mechanical propertiesTest ConditionTest MethodTest Result
Tensile modulusISO 527-23300 Mpa
Tensile modulusISO 527-2800 Mpa
Tensile modulusISO 527-2650 Mpa
Tensile modulusISO 527-2600 Mpa
Tensile modulusISO 527-2500 Mpa
tensile strength ISO 527-2100 Mpa
tensile strength ISO 527-250.0 Mpa
tensile strength ISO 527-240.0 Mpa
tensile strength ISO 527-235.0 Mpa
tensile strength ISO 527-230.0 Mpa
Nominal tensile fracture strainISO 527-240 %
Nominal tensile fracture strainISO 527-2> 50 %
Nominal tensile fracture strainISO 527-2> 50 %
Nominal tensile fracture strainISO 527-2> 50 %
Nominal tensile fracture strainISO 527-2> 50 %
Flexural modulusISO 1783000 Mpa
Flexural modulusISO 178800 Mpa
Flexural modulusISO 178600 Mpa
Impact resistanceTest ConditionTest MethodTest Result
Charpy Notched Impact StrengthISO 179/1eA12 kJ/m²
Impact strength of simply supported beam without notchISO 179/1eU无断裂
Impact strength of simply supported beam without notchISO 179/1eU无断裂
Impact strength of cantilever beam gapISO 180/1A10 kJ/m²
Electrical performanceTest ConditionTest MethodTest Result
Volume resistivityIEC 600931.0E+15 ohms·cm
dielectric strengthIEC 60243-125 KV/mm
relative permittivityIEC 602503.90
relative permittivityIEC 602503.60
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 1
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureISO 75-2/B280 °C
Heat distortion temperatureISO 75-2/A190 °C
melting temperatureISO 11357-3295 °C
Linear coefficient of thermal expansionISO 11359-28.5E-5 cm/cm/°C
Linear coefficient of thermal expansionISO 11359-21.1E-4 cm/cm/°C
Thermal Index - 5000 hrIEC 60216152 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top