PA6 Tekumid 6 BH30 TEKUMA Kunststoff GmbH
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | cm³/10min | 14.0 -- |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | MPa | 9800 6100 | |
| tensile strength | Break | MPa | 180 105 |
| Tensile creep modulus | MPa | 5100 -- | |
| Flexural modulus | MPa | 8600 5100 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | kJ/m² | 10 10 | |
| kJ/m² | 15 20 | ||
| Impact strength of simply supported beam without notch | kJ/m² | 70 70 | |
| kJ/m² | 80 95 | ||
| Impact strength of cantilever beam gap | kJ/m² | 15 20 | |
| Suspended wall beam without notch impact strength | kJ/m² | 70 80 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | °C | 200 -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top