Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Melt volume flow rate | | ISO1133 | 9.00 cm3/10min |
| other | Test Condition | Test Method | Test Result |
|---|
| notes | | | 注射成型 |
| | | 磷含量，低（到无），共聚物，阻燃性能 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | IEC60695-11-10,-20 | V-0 |
| UL flame retardant rating | | IEC60695-11-10,-20 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 725 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 725 °C |
| Limiting Oxygen Index | | ISO4589-2 | 36 % |
| burning rate | | ISO3795 | 0.0 mm/min |
| burning rate | | ISO3795 | 0.0 mm/min |
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/1A/1 | 1900 Mpa |
| Tensile stress | | ISO527-2/1A/50 | 22.0 Mpa |
| Tensile strain | | ISO527-2/1A/50 | 3.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 11 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 37 kJ/m² |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.04 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | >1.0E+15 ohms |
| Volume resistivity | | IEC60093 | >1.0E+13 ohms·cm |
| CTI | | IEC60112 | 600 V |
| High arc combustion index (HAI) | | UL746 | PLC 0 |
| High arc combustion index (HAI) | | UL746 | PLC 0 |
| Hot wire ignition (HWI) | | UL746 | PLC 3 |
| Hot wire ignition (HWI) | | UL746 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/Af | 58.0 °C |
| vicat | | ISO306/A50 | 150 °C |
| vicat | | ISO306/B50 | 72.0 °C |
| BallPressure Test | | IEC60695-10-2 | Pass |
| RTI Elec | | UL746 | 65.0 °C |
| RTI Elec | | UL746 | 65.0 °C |
| RTI Imp | | UL746 | 65.0 °C |
| RTI Imp | | UL746 | 65.0 °C |
| RTI Str | | UL746 | 65.0 °C |
| RTI Str | | UL746 | 65.0 °C |
| | ISO75-2/Bf | 108 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices