Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.60 g/cm³ |
| density | | ASTMD792 | 1.60 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore A | ASTMD2240 | 87 |
| Shore A | ASTMD2240 | 87 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863 | >35 % |
| Limiting Oxygen Index | | ASTMD2863 | >35 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | >12.5 MPa |
| elongation | Break | ASTMD638 | >130 % |
| tensile strength | | ASTMD638 | >12.5 MPa |
| elongation | Break | ASTMD638 | >130 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| HeatAging | | IEC60811 | Pass |
| Change rate of tensile strength in air | | IEC60811 | -25到25 % |
| Changes in tensile stress during fracture in air | | IEC60811 | -25到25 % |
| Change rate of tensile strength in air | | IEC60811 | -25到25 % |
| Changes in tensile stress during fracture in air | | IEC60811 | -25到25 % |
| HeatAging | | IEC60811 | Pass |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Service | | | 70 °C |
| Bending test | | IEC60811 | Pass |
| Bending test | | IEC60811 | Pass |
| Service | | | 70 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare