PBT PB70 GR20 MELOS GERMANY

Form：Granules | Grade：Flame retardant grade

Properties:

Low friction coefficientImpact resistanceThermal insulationAging resistanceHigh glossDimensional stabilityFiller: Glass fiber reinf20% filler by weight

Typical Applications:

Electronic fieldElectrical field

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electronic field \| Electrical field
Properties:	Low friction coefficient \| Impact resistance \| Thermal insulation \| Aging resistance \| High gloss \| Dimensional stability \| Filler: Glass fiber reinf \| 20% filler by weight

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			加纤20% 增强级
purpose			连接器插件
impact performance	Test Condition	Test Method	Test Result	Test Unit
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	60	kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	65	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.75mm	UL 94	V-2
UL flame retardant rating	UL flame retardant rating	1.6mm	UL 94	V-0
Burning wire flammability index	2.0mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	2.0mm	IEC 60695-2-13	725	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2	7500	Mpa
tensile strength	Break,23°C	ISO 527-2	100	Mpa
Tensile strain	Break,23°C	ISO 527-2	3.0	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	215	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	175	°C
Melting temperature		ISO 11357-3	225to255	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.20	%
water content		ISO 15512	<0.080	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+14	ohms
Volume resistivity		IEC 60093	1E+16	ohms·cm
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 3

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top