Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.47 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 16 g/10min |
| Ash content ProcedureB | | ASTMD5630 | 44 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 95 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863 | 35 % |
| Smoke density | | ASTME662 | 30 Ds |
| Smoke density | | ASTME662 | 230 Ds |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTMD790 | 186 MPa |
| tensile strength | Break | ASTMD638 | 13.8 MPa |
| elongation | Break | ASTMD638 | 200 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ASTMD470 | 56.0 kN/m |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of ultimate elongation in air | | ASTMD638 | -15 % |
| Change rate of tensile strength | | ASTMD638 | -15 % |
| Change rate of ultimate elongation | | ASTMD638 | -5.0 % |
| Change rate of tensile strength in air | | ASTMD638 | 5.0 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTMD746 | -35.0 °C |
| UL temperature rating | | UL1581 | 90 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare