PC Next PC CX-01BK Next Polymers Ltd.

Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	23°C	ASTM D256	65.0 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C	ASTM D256	12.0 kJ/m²

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.8mm	UL 94	V-2

mechanical properties	Test Condition	Test Method	Test Result
bending strength		ASTM D790	92.0 MPa
Bending modulus		ASTM D790	2300 MPa
elongation	Break	ASTM D638	>70 %
tensile strength		ASTM D638	62.0 MPa
Tensile modulus		ASTM D638	2300 MPa

thermal performance	Test Condition	Test Method	Test Result
thermal conductivity		ASTMC177	0.20 W/m/K
Linear coefficient of thermal expansion	MD：23to80°C	ISO 11359-2	7E-05 cm/cm/°C
Vicat softening temperature		ASTM D1525	140 °C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	125 °C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	136 °C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	Saturation2	ASTM D570	0.35 %
Water absorption rate	Water absorption rate	23°C,24hr	ASTM D570	0.30 %
Shrinkage rate	TD	ASTM D955	0.50 %
Shrinkage rate	Shrinkage rate	MD	ASTM D955	0.50 %
melt mass-flow rate	300°C/1.2kg	ASTM D1238	15 g/10min
density		ASTM D792	1.20 g/cm³

Electrical performance	Test Condition	Test Method	Test Result
Surface resistivity		IEC 60093	1E+15 ohms
Dielectric constant	60Hz	ASTM D150	3.00
Dielectric strength		IEC 60243-1	30 kV/mm
Volume resistivity		IEC 60093	1E+15 ohms·cm

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R-Scale	ASTM D785	120

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top