Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | ASTM D792 | 1.30 g/cm³ |
Shrinkage rate | | ASTM D995 | 0.20 % |
Water absorption rate | | ASTM D570 | 0.090 % |
hardness | Test Condition | Test Method | Test Result |
---|
Rockwell hardness | | ASTM D785 | 118 R |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ASTM D790 | 179 MPa |
tensile strength | | ASTM D638 | 138 MPa |
elongation at break | | ASTM D638 | 2.0 % |
Flexural modulus | | ASTM D790 | 8270 MPa |
Impact strength of cantilever beam gap | | ASTM D256 | 128 J/m |
Flame retardant performance | Test Condition | Test Method | Test Result |
---|
UL flame retardant rating | | UL -94 | V-0 1.50mm |
Electrical performance | Test Condition | Test Method | Test Result |
---|
Volume resistivity | | ASTM D257 | 1E+07 Ω.cm |
Surface Resistivity | | ASTM D257 | 1E+07 Ω.cm |
Electromagnetic shielding effectiveness (EMI) | | ASTM D4935 | 10-30 dB |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTM D648 | 149 °C |
Heat distortion temperature | | ASTM D696 | 5.4E-03 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.