PP H32GA
0
- Usages:Injection moldinghigh-speed forming of thin-walled productsextrusion moldinglow elasticity short fiber 3000mmin high-speed spinning
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 38-46 g/10min |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| yellow index | 4 | ||
| ash content | 100 μg/g |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile yield strength | 34 MPa | ||
| flexural modulus | 1471 MPa | ||
| Izod notched impact strength | 2 Kj/m2 | ||
| Rockwell hardness | 96 R | ||
| Tensile yield elongation | 9-15 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | 100 ℃ | ||
| vicat | 153 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top