Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
Shrinkage rate | | Internal | 0.5-0.7 % |
Shrinkage rate | | Internal | 0.6-0.8 % |
specific volume | | ASTM D792 | 0.82 cm³/g |
Thermal Properties | Test Condition | Test Method | Test Result |
---|
RTI Imp | | UL 746B | 75 °C |
RTI Elec | | UL 746B | 75 °C |
RTI Imp | | UL 746B | 75 °C |
combustibility | Test Condition | Test Method | Test Result |
---|
UL flame retardant rating | | UL 94 | 1.49 mm |
Electrical Property | Test Condition | Test Method | Test Result |
---|
Compared to the Leakage Traceability Index (CTI) | | UL 746A | PLC_2 |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
tensile strength | | ASTM D638 | 61 Mpa |
elongation at break | | ASTM D638 | 120 % |
bending strength | | ASTM D790 | 93 Mpa |
Flexural modulus | | ASTM D790 | 2340 Mpa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ASTM D256 | 106 J/m |
Suspended wall beam without notch impact strength | | ASTM D256 | 667 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.