PPA LUVOCOM® 20/AF/15/TF/10

Properties:
Filler
aromatic polyamide fiber
15%
filler by weight
Usages:
Applications in the automotive industry
bearings
gears
textile applications
business equipment
switches
and engineering accessories
Compare

Technical Data Sheet

physical property	Test Method	Test Result
Water absorption rate		<0.30 %
density	ISO1183	1.28 g/cm³
Shrinkage rate	DIN16901	0.70到1.4 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO179/1fU	12 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO179/1eU	15 kJ/m²

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO527-2	5000 MPa
Tensile stress	Break	ISO527-2	65.0 MPa
Tensile strain	Yield	ISO527-2	2.0 %
Flexural modulus		ISO178	4500 MPa
Bending stress		ISO178	94.0 MPa
Bending Strain		ISO178	2.3 %

Electrical performance	Test Condition	Test Method	Test Result
insulation resistance		IEC60167	>1.0E+12 ohms

Thermal performance	Test Method	Test Result
	ISO75-2/A	258 °C
Continuous use temperature	UL746B	165 °C
Maximum operating temperature - SharrTerm		195 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top