HIPS 4440
69
- Properties:High impact resistanceDimensional stabilityAcceptable food contactGood dimensional stabilitHigh impact resistance
- Usages:sheathBusiness equipmentEnterprise Equipmentsheath
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.40-0.70 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 10 g/10min | |
| Water absorption rate | ISO 62 | 0.10 % | |
| density | ISO 1183 | 1.04 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2050 Mpa | |
| Breaking stress | ISO 527-2 | 20.0 Mpa | |
| fracture strain | ISO 527-2 | 55 % | |
| Tensile creep modulus | ISO 899-1 | 2000 Mpa | |
| Flexural modulus | ISO 178 | 2000 Mpa | |
| Charpy Notched Impact Strength | ISO 179/1eU | 9.00 KJ/m | |
| Impact strength of cantilever beam gap | ISO 180/1A | 10.00 KJ/m | |
| Rockwell hardness | ISO 2039-2 | 76 R scale |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+13 ohms | |
| dielectric strength | IEC 60243-1 | 150.00 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 74.0 °C | |
| ISO 75-2/A | 90.0 °C | ||
| ISO 75-2 | 89.5 °C | ||
| vicat | ISO 306/A50 | 96.0 °C | |
| ISO 306/B50 | 88.0 °C | ||
| ISO 306 | 88.0 °C | ||
| Linear coefficient of thermal expansion | ISO 11359-2 | 0.000090 cm/cm/℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top