LDPE ALCUDIA® PE-003
19
- Properties:Excellent surface smoothnFood contact complianceCrosslinkableEasy to processcross-linkingAcceptable in contact witGood processing performanGood surface finish
- Usages:chipfilmLaminateLow voltage insulationWire and cable applicationsShrinkable filmCast filmfilmLaminatechipShrinkage packagingApplication of wires and cables
CompareTechnical Data Sheet
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTM D-2457 | 60 | |
| Haze ratio | ASTM D-1003 | 9 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-1505 | 0.920 g/m3 | |
| melt mass-flow rate | ASTM D-1238 | 2 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation at break | ASTM D-638 | 500 % | |
| Tensile stress | ISO 527-3 | 11 Mpa | |
| ISO 527-3 | 11 Mpa | ||
| ISO 527-3 | 20 Mpa | ||
| ISO 527-3 | 30 Mpa | ||
| elongation at break | ISO 527-3 | 650 % | |
| ISO 527-3 | 200 % | ||
| Dart impact | ISO 7765-1 | 90 g | |
| Elmendorf tear strength | ISO 6383-2 | 0.60 N | |
| ISO 6383-2 | 1.6 N | ||
| tensile strength | ASTM D-638 | 14 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1E+16 ohm·cm | |
| dielectric constant | ASTM D-150 | 2.3 | |
| Dissipation Factor | ASTM D-150 | 0.0003 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 92 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top