Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | ASTM D792B | 0.900 g/cm³ |
melt mass-flow rate | | ASTM D1238 | 7.0 g/10min |
optical performance | Test Condition | Test Method | Test Result |
---|
gloss | | ASTM D2457 | 148 |
Haze ratio | | ASTM D1003 | 0.23 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
elongation | Yield | ASTM D638 | 14 % |
Flexural modulus | | ASTM D790A | 730 MPa |
tensile strength | Yield | ASTM D638 | 23.0 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ASTM D256A | 50 J/m |
film | Test Condition | Test Method | Test Result |
---|
Initial sealing temperature | | 内部方法 | 105 °C |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTM D648 | 75.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.