PA6T/66 HT2VZ 33H BK 9205 EMS-CHEMIE SWITZERLAND

Form：Granules

Properties:

Impact resistanceheat-resisting

Typical Applications:

Automotive industryElectronic ApplicationsElectrical applicationsEngineering accessoriesIndustrial accessoriestoolOutdoor applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive industry \| Electronic Applications \| Electrical applications \| Engineering accessories \| Industrial accessories \| tool \| Outdoor applications
Properties:	Impact resistance \| heat-resisting

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	50	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	55	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level		UL 94	HB
ISO Type		ISO 1874	PA 6T/66. MH. 14-110. GF33
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	11000	Mpa
tensile strength	Break	ISO 527-2	200	Mpa
Tensile strain	Break	ISO 527-2	2.5	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	285	°C
Hot deformation temperature	Hot deformation temperature	8.0 MPa, Unannealed	ISO 75-2/C	200	°C
Continuous use temperature	--2	ISO 2578	140	°C
Continuous use temperature	Continuous use temperature	--3	Internal Method	260	°C
Melting temperature		ISO 11357-3	310	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	2.0E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	6.0E-5	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow	ISO 294-4	0.90	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.10	%
Water absorption rate	Saturation, 23°C	ISO 62	5.0	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	2.0	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	--	ohms
Volume resistivity		IEC 60093	1.0E+12	ohms·cm
Dielectric strength		IEC 60243-1	38	KV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	260	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top