Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ASTMD570 | 2.3 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 29 J/m |
| Impact strength of cantilever beam gap | | ASTMD256 | 21 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 74.5 MPa |
| tensile strength | | ASTMD638 | 156 MPa |
| bending strength | | ASTMD790 | 121 MPa |
| bending strength | | ASTMD790 | 92.4 MPa |
| compressive strength | | ASTMD695 | 55.2 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | ASTMD150 | 0.052 |
| arc resistance | | ASTMD495 | 76.0 sec |
| Compared to the Leakage Tracking Index (CTI) | | UL746 | 180 V |
| High arc combustion index (HAI) | | UL746 | >200 |
| High Voltage Arc Traceability Rate (HVTR) | | UL746 | 24.0 mm/min |
| Hot wire ignition (HWI) | | UL746 | >300 sec |
| DielectricBreakdown | | ASTMD149 | 83000 V |
| dielectric strength | | ASTMD149 | 14 kV/mm |
| dielectric constant | | ASTMD150 | 5.88 |
| dielectric constant | | ASTMD150 | 4.70 |
| Dissipation Factor | | ASTMD150 | 0.056 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| RTI Elec | | UL746 | 125 °C |
| RTI | | UL746 | 125 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare