
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 7 | kJ/m² | |
| ISO 179/1U | 45 | kJ/m² | ||
| Impact strength of cantilever beam gap | 有Notched | ISO 180-A | 8 | kJ/m² |
| ISO 180/U | 40 | kJ/m² | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | 23℃ | ISO 868 | 86 | D 级 |
| tensile strength | Break,23℃ | ISO 527 | 205 | Mpa |
| Tensile strain | Break,23℃ | ISO 527 | 2 | % |
| bending strength | Break,23℃ | ISO 178 | 310 | Mpa |
| Bending modulus | 23℃ | ISO 178 | 16000 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | ISO 11357 | 343 | °C | |
| Hot deformation temperature | 1.8 Mpa | ISO 75-f | 325 | °C |
| Glass transition temperature | 起始 | ISO 11357 | 143 | °C |
| specific heat | 23℃ | DSC | 1.8 | kJ/kg/℃ |
| Linear coefficient of thermal expansion | 低于Tg沿着Flow | ISO 11359 | 8 | ppm/K |
| 高于Tg沿着Flow | ISO 11359 | 8 | ppm/K | |
| thermal conductivity | 23℃ | ISO 22007-4 | 0.95 | W/m/K |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | 结晶 | ISO 1183 | 1.37 | g/cm³ |
| Water absorption rate | 23℃,24hr,3.20 mm | ISO 62-1 | 0.05 | % |
| Equilibrium,23℃,3.20 mm | ISO 62-1 | 0.4 | % | |
| Shrinkage rate | MD | ISO 294-4 | 0.7 | % |
| TD | ISO 294-4 | 0.2 | % | |
| melt mass-flow rate | 380℃,5.0kg | ISO 1133 | 7 | g/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | 23 ℃,1V | IEC 60093 | 10^7 | ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.