Copolyester 0831
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.27 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.20to0.50 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 107 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmissivity | ASTM D1003 | 91.0 % | |
| Haze ratio | ASTM D1003 | 0.40 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | ASTM D3763 | 35.0 J | |
| Impact strength of cantilever beam gap | ASTM D256 | 46 J/m | |
| ASTM D256 | 84 J/m | ||
| Suspended wall beam without notch impact strength | ASTM D256 | 无断裂 | |
| ASTM D256 | 无断裂 | ||
| Dart impact | ASTM D3763 | 44.0 J |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 48.0 MPa | |
| elongation | ASTM D638 | 75 % | |
| Flexural modulus | ASTM D790 | 1900 MPa | |
| bending strength | ASTM D790 | 66.0 MPa | |
| tensile strength | ASTM D638 | 24.0 MPa | |
| elongation | ASTM D638 | 4.0 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 68.0 °C | |
| ASTM D648 | 60.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top